Ford Escape: Climate Control System - General Information / Removal and Installation - Air Conditioning (A/C) Pressure Transducer - 1.5L EcoBoost (132kW/180PS) – I3 (Y1)
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Disconnect the electrical connector and remove the A/C pressure transducer.
Torque:
71 lb.in (8 Nm)
Installation
-
To install, reverse the removal procedure.
Removal
NOTICE:
During the removal or installation of components, cap, tape
or otherwise appropriately protect all openings and tubes/fittings to
prevent the ingress of dirt or other contamination...
Removal
Remove the glove compartment.
Refer to: Glove Compartment (501-12 Instrument Panel and Console, Removal and Installation).
Remove the screws and the air distribution door actuator...
Other information:
System Operation
System Diagram
Item
Description
1
IPC chime arbitrator
2
ABS module
3
IPC
4
PAM
5
Door ajar switches
6
Driver seatbelt buckle
7
Passenger seatbelt buckle
8
RCM
9
PCM
10
GWM
11
Key-in ignition switch
12
SCCM
13
ACM
14
Rear speakers
15
..
System Diagram
Item
Description
1
SOBDMC /ISC (Inverter System Controller)
2
APIM
3
FCIM
4
BCM
5
BMS
6
DCDC
7
PCM
8
GWM
9
BECM
10
SOBDM /BCCM (Battery Charger Control Module)
11
EVSE (Electric Vehicle Supply Equipment)
12
High Voltage Battery
13
High Voltage Bat..