Ford Escape Manuals
Ford Escape 2020-2022 Service Manual / Powertrain / Engine / Fuel Charging and Controls / Description and Operation - Fuel Charging and Controls - Component Location

Ford Escape: Fuel Charging and Controls / Description and Operation - Fuel Charging and Controls - Component Location

2.5L Duratec - Hybrid


Item Description
1 Fuel injector
2 Fuel rail
3 Throttle body

Fuel Pump Driver Module


Item Description
1 Fuel pump driver module

    Fuel Charging and Controls

    ..

    Description and Operation - Fuel Charging and Controls - System Operation and Component Description

    System Operation Air Fuel Ratio Imbalance Monitor The air fuel ratio imbalance monitor is an on board diagnostic strategy designed to monitor the air fuel ratio...

    Other information:

    Ford Escape 2020-2022 Service Manual: Removal and Installation - Degas Bottle


    Special Tool(s) / General Equipment Fluid Suction Gun Hose Clamp Remover/Installer Locking Pliers Removal   WARNING: Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief cap when the engine is operating or the cooling system is hot...

    Ford Escape 2020-2022 Service Manual: General Procedures - Compression and Cylinder Leakage Test - 2.5L Duratec – Hybrid (121kW/164PS) (BG)


    NOTE: The compression test requires cranking the engine a minimum of 5 compression strokes with the throttle plate in the wide-open position for each cylinder. The engine cranking diagnostic mode must be used to crank the engine and the brake/accelerator pedals must be used to position the throttle plate during the compression test...

    Categories

    Symbols Glossary

    These are some of the symbols you may see on your vehicle.

    Ford Escape. Symbols Glossary Air conditioning system

    read more

    Copyright © 2022 www.fordescape4.com