Ford Escape: Active Park Assist / Active Park Assist Precautions. Switching Active Park Assist On and Off
Active Park Assist Precautions
WARNING: You must remain in
your vehicle when the system turns on.
At all times, you are responsible for
controlling your vehicle, supervising the
system and intervening, if required.
Failure to take care may result in the loss
of control of your vehicle, serious
personal injury or death.
WARNING: The sensors may not
detect objects in heavy rain or other
conditions that cause interference.
WARNING: You are responsible for
controlling your vehicle at all times. The
system is designed to be an aid and does
not relieve you of your responsibility to
drive with due care and attention. Failure
to follow this instruction could result in
the loss of control of your vehicle,
personal injury or death.
WARNING: Do not use the system
with accessories that extend beyond the
front or rear of your vehicle, for example
a trailer hitch or bike rack. The system is
not able to make corrections for the
additional length of the accessories.
Switching Active Park Assist On and Off
Press the active park assist
button to bring up full screen
notifications.
Press the soft keys on the touchscreen to
switch between parallel park in,
perpendicular park in or parallel park out
parking modes.
Cancelling Active Park Assist
To cancel parking assistance at any time:
- Press the active park assist button
during operation.
- Grab the steering wheel during
operation.
- Drive above 22 mph (35 km/h) for a
short period of time when searching for
a parking space.
- Drive above 6 mph (9 km/h) during
operation.
- Switch traction control off.
What Is Active Park Assist
Assists you with parking in and out of
parking spaces.
How Does Active Park Assist Work
Active park assist uses sensors to detect
parking spaces...
Press the active park assist button.Note: The system detects
other vehicles
and curbs to find a parking space.
Use the turn signal lever to search for
a parking space on the driver or
passenger side of your vehicle...
Other information:
Note: Select charge settings on the home
page of the touchscreen or under the vehicle
settings menu to access charge preferences.
Charging may not begin upon plugging in
if you have set up preferred charge times
for this vehicle location. Your vehicle could
delay charging to take advantage of
off-peak electricity rates...
System Operation
Air Fuel Ratio Imbalance Monitor
The air fuel ratio imbalance monitor is an on board diagnostic strategy designed to monitor the air fuel ratio.
Air Fuel Ratio Imbalance Monitor — Heated Oxygen Sensor (HO2S) Monitor
The air fuel ratio imbalance monitor estimates the cylinder to
cylinder air fuel ratio difference using the universal HO2S
high frequency signal...