Ford Escape: Adaptive Cruise Control / Adaptive Cruise Control Indicators. Switching From Adaptive Cruise Control to Cruise Control
Adaptive Cruise Control Indicators
Illuminates when you switch
adaptive cruise control on. The
color of the indicator changes to
indicate the system status.
White indicates the system is on but inactive.
Green indicates that you set the speed and the system is active.
Switching From Adaptive Cruise Control to Cruise Control
WARNING: Normal cruise control will not brake when your vehicle is approaching slower vehicles. Always be aware of which mode you have selected and apply the brakes when necessary.
Use the touchscreen to select the following:
- Select Settings.
- Select Driver Assist.
- Select Cruise Control.
- Select Normal.
The cruise control indicator
replaces the adaptive cruise
control indicator if you select
normal cruise control. The gap setting does
not display, and the system does not
respond to lead vehicles. Automatic
braking remains active to maintain set
speed. The system remembers the last
setting when you start your vehicle.
Canceling the Set Speed. Resuming the Set Speed. Overriding the Set Speed
Canceling the Set Speed
Press the button or tap the
brake
pedal.
The set speed does not erase.
Resuming the Set Speed
Press the button.
Your vehicle speed returns to the
previously set speed and gap setting...
Lane Centering
How Does Lane Centering Work
Adaptive cruise control with lane centering
uses radar and camera sensors to help
keep your vehicle in the lane by applying
continuous assistance steering torque
input toward the lane center on highways...
Other information:
Ford Escape 2020-2026 Service Manual: Removal and Installation - Hands-Free Liftgate Actuation Upper Sensor
Removal With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting (100-02) . Drill the rivets, release the tabs and remove the lower rear bumper cover valence Disconnect the hands-free liftgate actuation upper sensor electrical connector...
Ford Escape 2020-2026 Service Manual: Removal and Installation - Headlamp Bulb
Removal Low beam bulb, vehicles equipped with halogen headlamps Remove the low beam headlamp bulb cover. Remove the low beam headlamp bulb. Disconnect the electrical connector. Rotate the low beam headlamp bulb counterclockwise and remove the bulb holder from the headlamp assembly...
Categories
- Manuals Home
- 4th Generation Ford Escape Owners Manual
- 4th Generation Ford Escape Service Manual
- Opening and Closing the Hood
- General Procedures - Brake Service Mode Activation and Deactivation
- Drive Modes
- New on site
- Most important about car
Fastening the Seatbelts
