Ford Escape: Seatbelts / Fastening the Seatbelts

- Insert the belt tongue into the proper
buckle, the buckle closest to the
direction the tongue is coming from,
until it engages.
Note: Make sure that the seatbelt tongue
is properly fastened in the seatbelt buckle.

- Press the button to release the seatbelt
tongue.

When in use, place the rear seatbelts in the
belt guides on the outermost seat
backrests.
WARNING: Always drive and ride
with your seatback upright and the lap
belt snug and low across the hips.
WARNING: Children must always
be properly restrained...
Sensitive Locking Mode
What is Sensitive Locking Mode
Sensitive locking mode is a seatbelt
retractor feature that allows shoulder belt
length adjustment according to your
movements and locking in response to
vehicle movement...
Other information:
Inspection
Recover the refrigerant.
Refer to: Air Conditioning (A/C) System Recovery, Evacuation and
Charging (412-00 Climate Control System - General Information, General
Procedures).
Disconnect the evaporator from the A/C system...
Activation
WARNING:
Before beginning any service procedure in this section,
refer to Safety Warnings in section 100-00 General Information. Failure
to follow this instruction may result in serious personal injury.
NOTE:
If you are using a MyKey® programmed key, the Belt-Minder®
cannot be disabled and does not time out after 5 minutes...