Other information:
Special Tool(s) /
General Equipment
Hose Clamp Remover/Installer
Removal
Drain the cooling system.
Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding (303-03C Engine Cooling, General Procedures).
Disconnect the electrical connector.
Release the clamps and disconnect the coolant hoses.
Use the General Equipme..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Disconnect the electrical connector and remove the A/C pressure transducer.
Torque:
71 lb.in (8 Nm)
Installation
To install, reverse the removal procedure.
..