Ford Escape: Capacities and Specifications / Engine Oil Capacity and Specification - 1.5L EcoBoostâ„¢
Use oil that meets the defined
specification and viscosity grade.
If you do not use oil that meets the defined
specification and viscosity grade, it could
result in:
- Component damage that your vehicle
warranty does not cover.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced vehicle performance.
- Reduced fuel economy.
![Ford Escape. Engine Oil Capacity and Specification - 1.5L EcoBoostâ„¢](images/engine_oil_capacity_and_specification_1_5l_ecoboostv_-2185/1812/ford_escape_engine_oil_capacity_and_specification_1_5l_ecoboosttm_630.gif)
An oil that displays this symbol conforms
to current engine, emission system and
fuel economy performance standards of
ILSAC.
We recommend Motorcraft motor oil for
your vehicle. If Motorcraft oil is not
available, use motor oils of the
recommended viscosity grade that meet
API SP requirements and display the API
Certification Mark for gasoline engines.
Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that your
vehicle warranty does not cover.
Capacities
![Ford Escape. Engine Oil Capacity and Specification - 1.5L EcoBoostâ„¢](images/engine_oil_capacity_and_specification_1_5l_ecoboostv_-2185/1812/ford_escape_engine_oil_capacity_and_specification_1_5l_ecoboosttm_631.gif)
Materials
![Ford Escape. Engine Oil Capacity and Specification - 1.5L EcoBoostâ„¢](images/engine_oil_capacity_and_specification_1_5l_ecoboostv_-2185/1812/ford_escape_engine_oil_capacity_and_specification_1_5l_ecoboosttm_632.gif)
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance,
we recommend that you use the following
alternative engine oil in extremely cold
climates, where the ambient temperature
reaches -22.0°F (-30°C) or below.
Materials
![Ford Escape. Engine Oil Capacity and Specification - 1.5L EcoBoostâ„¢](images/engine_oil_capacity_and_specification_1_5l_ecoboostv_-2185/1812/ford_escape_engine_oil_capacity_and_specification_1_5l_ecoboosttm_633.gif)
![Ford Escape. Engine Oil Capacity and Specification - 1.5L EcoBoostâ„¢](images/engine_oil_capacity_and_specification_1_5l_ecoboostv_-2185/1812/ford_escape_engine_oil_capacity_and_specification_1_5l_ecoboosttm_634.gif)
1.5L EcoBoostâ„¢
1 If a Motorcraft oil filter is not available, use
an oil filter that meets industry performance
specification SAE/USCAR-36.
We recommend Motorcraft parts that are
available at your authorized dealer or at
www...
Use oil that meets the defined
specification and viscosity grade.
If you do not use oil that meets the defined
specification and viscosity grade, it could
result in:
Component damage that your vehicle
warranty does not cover...
Other information:
Special Tool(s) /
General Equipment
307-805Alignment Pins (2)
Ford Diagnostic Equipment
Materials
Name
Specification
Engine Oil - SAE 0W-20 - Synthetic Blend Motor OilXO-0W20-Q1SP
WSS-M2C947-B1
Removal
NOTICE:
Be sure to keep all fluid and debris away from any open ISC
(inverter system controller) connections, or disassembled/ open
transmission compone..
Make sure the oil in the crankcase is of the correct
viscosity and at the correct level and that the battery is correctly
charged. Operate the vehicle until the engine is at normal operating
temperature. Turn the ignition switch to the OFF position.
Remove the spark plugs. For additional information, refer to: Spark
Plugs (303-07A Engine Ignition - 1.5L EcoBoost (132kW/180PS) â..