Ford Escape: Memory Function
How Does the Memory Function Work
The memory function recalls the position
of these features:
- Driver seat.
- Power mirrors.
Memory Function Precautions
WARNING: Before activating the
memory seat, make sure that the area
immediately surrounding the seat is clear
of obstructions and that all occupants
are clear of moving parts.
WARNING: Do not use the memory
function when your vehicle is moving.
Locating the Memory Function Buttons

The memory function buttons are on the
driver door.
Saving a Preset Position
- Switch the ignition on.
- Adjust the memory features to your
preferred position.
- Press and hold the preferred preset
button until you hear a single tone.
A confirmation message appears in the
information display.
You can save up to three preset memory
positions at any time.
Recalling a Preset Position
Press and release the preset button.
Note: You can only recall a preset memory
position when the ignition is off, or when you
place the transmission in park (P) or neutral
(N) if the ignition is on and the vehicle is not
moving.
You can also recall a preset memory
position by:
- Pressing the unlock button on your
remote control if you linked it to a
preset position.
- Unlocking the intelligent driver door
handle if a linked remote control is
present.
Using a linked remote control to recall your
memory position when the ignition is off
moves the seat to the easy entry position.
Note: Pressing any active memory feature
adjustment control, or any preset buttons
during a memory recall cancels the
operation.
Linking a Preset Position to your Remote Control or Passive Key
Your vehicle can save the preset memory
positions for up to three remote controls
or passive keys.
- With the ignition on, move the memory
features to the position you prefer.
- Press and hold a preset button for five
seconds. A tone sounds after two
seconds. Continue holding until you
hear a second tone.
- Within three seconds, press the lock
button on the remote control you are
linking.
To unlink a remote control, follow the
same procedure – except in Step 3, press
the unlock button on the remote control.
Note: If more than one linked remote
control or intelligent access key is in range,
the memory function moves to the settings
of the first key to initiate a memory recall.
What is the Rear Occupant Alert System
The rear occupant alert system monitors
vehicle conditions and notifies you to check
for rear seat occupants when you switch
the ignition off...
Other information:
NOTE:
The compression test requires cranking the engine a minimum of 5
compression strokes with the throttle plate in the wide-open position
for each cylinder. The engine cranking diagnostic mode must be used to
crank the engine and the brake/accelerator pedals must be used to
position the throttle plate during the compression test. The engine
cranking diagnostic mode is a PCM
strategy whi..
Inspection
WARNING:
If a vehicle has been in a crash, inspect the Restraints
Control Module (RCM) and impact sensor mounting areas for any damage or
deformation. Also inspect the related components for any cracks, damage,
or loose fasteners. If the mounting area is damaged, restore the
area(s) to the original production configuration. After repairing the
mounting area(s), the orig..
http://fashioncaprice.ru/moda/jenskie-djinsyi-raznyih-firm-modeli-ot-Calvin-Klein-Dairos-F5-/