Other information:
Special Tool(s) /
General Equipment
Feeler Gauge
Cleaning
Clean the exhaust manifold using a suitable solvent. Use
a plastic scraping tool to clean the gasket sealing surfaces.
Inspection
NOTE:
New exhaust manifold gaskets, studs, nuts and/or
bolts must be installed when an exhaust manifold is serviced...
NOTE:
Coolant temperature will vary with ambient temperature and load.
Temperatures shown are for ambient temperature of 38° C (100° F). Red
arrows indicate a temperature over 90° C (194° F), Orange arrows
indicate a temperature of approximately 90° C (194° F), Blue arrows
indicate a temperature below 90° C (194° F)...