Other information:
Special Tool(s) /
General Equipment
Feeler Gauge
Check
Refer to: Valve Cover (303-01C Engine, Removal and Installation).
NOTE:
Turn the engine clockwise only, and only use the crankshaft bolt.
NOTE:
Before removing the camshafts, measure the
clearance of each valve at base circle, with the lobe pointed away from
the tappet...
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Open the rear tail gate.
Release the clips and remove the upper liftgate trim panel...