Other information:
Check
NOTE:
Refer to the appropriate Section 303-01 for the specifications.
NOTE:
The cylinder bore must be within the specifications for taper and out-of-round before fitting a piston.
Measure the cylinder bore in 2 directions...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Refer to: Intake Manifold (303-01B Engine - 2.0L EcoBoost (177kW/240PS) – MI4, Removal and Installation).
Position aside the PCV tube.
Remove the crankcase vent oil separator bolts and then remove the crankcase vent oil separator...