Ford Escape Manuals

Ford Escape: Load Carrying / Calculating Payload

Tire and Loading Label Information Example:

Ford Escape. Calculating Payload

Payload is the combined weight of cargo and passengers that your vehicle is carrying. The maximum payload for your vehicle appears on the Tire and Loading label. The label is either on the B-pillar or the edge of the driver door. Vehicles exported outside the US and Canada may not have a tire and loading label. Look for “The combined weight of occupants and cargo should never exceed XXX kg or XXX lb” for maximum payload. The payload listed on the Tire and Loading Information label is the maximum payload for your vehicle as built by the assembly plant. If you install any additional equipment on your vehicle, you must determine the new payload. Subtract the weight of the equipment from the payload listed on the Tire and Loading label. When towing, trailer tongue weight or king pin weight is also part of payload.

    Locating the Safety Compliance Certification Labels. What Is the Gross Axle Weight Rating. What Is the Gross Vehicle Weight Rating. What Is the Gross Combined Weight Rating

    Locating the Safety Compliance Certification Labels Safety Compliance Certification Label Example: The Safety Compliance Certification label is located on the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver seating position...

    Calculating the Load Limit

    Steps for determining the correct load limit: Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lb...

    Other information:

    Ford Escape 2020-2026 Owners Manual: Keys and Remote Controls


    Argentina Brazil Djibouti Ghana Jamaica Jordan Malaysia F17000176 Mauritania Moldova Morocco Pakistan Paraguay NR: 2016-9-I-000223 NR: 2016-9-I-000222 NR: 2016-9-I-000220 NR: 2018-07-I-000317 Serbia Singapore South Africa South Korea MSIP-CRM-TAL-A2C97102000 Taiwan, China Ukraine United Arab Emirates (U...

    Ford Escape 2020-2026 Service Manual: Removal and Installation - Tie Rod End


    Special Tool(s) / General Equipment Tie Rod End Remover Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: Left hand (LH) side shown, right hand (RH) side similar. Remove the wheel and tire...

    Categories

    Master Access Code

    What Is the Master Access Code

    The master access code is a factory-set five-digit entry code. You can operate the keypad with the master access code at any time. The master access code is on the owner’s wallet card in the glove box and is available from an authorized dealer.

    Displaying the Master Access Code

    To display the factory-set code in the information display:

    Ford Escape. Master Access Code

    Remove the rubber mat. Insert the first programmed key in the backup slot. Press the push button ignition switch once and wait a few seconds. Press the push button ignition switch again and remove the key. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push button ignition switch.

    read more

    Copyright © 2026 www.fordescape4.com