Ford Escape Manuals
Ford Escape 2020-2025 Owners Manual / Keyless Entry / Locking and Unlocking the Doors Using Keyless Entry

Ford Escape: Keyless Entry / Locking and Unlocking the Doors Using Keyless Entry

Unlocking the Doors - Vehicles With: Keyless Entry and Push Button Start

Ford Escape. Locking and Unlocking the Doors Using Keyless Entry

With your intelligent access key within 3 ft (1 m) of your vehicle, touch the unlock sensor on the back of the door handle for a brief period and then pull on the door handle to unlock, being careful to not touch the lock sensor at the same time or pulling the door handle too quickly. The intelligent access system requires a brief delay to authenticate your intelligent access key.

Unlocking the Doors - Vehicles With: Keypad

Enter the factory-set five-digit code or your personal code. You must press each number within five seconds of each other.

  • Press 3-4 within five seconds to unlock all doors.
  • Press 5-6 within five seconds to release or open the tailgate, if available.

Locking the Doors - Vehicles With: Keyless Entry and Push Button Start

Ford Escape. Locking and Unlocking the Doors Using Keyless Entry

With your intelligent access key within 3 ft (1 m) of your vehicle, touch the outer door handle lock sensor for approximately one second to lock, being careful to not touch the unlock sensor on the back of the door handle at the same time. After locking, you can immediately pull on the door handle to confirm locking occurred without inadvertently unlocking.

Locking the Doors - Vehicles With: Keypad

Press and hold 7·8 and 9·0 at the same time with the driver door closed.

Note: You do not need to enter the five digit code first.

    Keyless Entry Settings

    Switching Keyless Entry On and Off Switch the ignition on using an original key that has not been created as a MyKey. Press Settings on the touchscreen...

    Keyless Entry – Troubleshooting

    Keyless Entry – Frequently Asked Questions Why does the keypad not accept the access code? If you enter the access code too fast on the keypad, the unlock function may not work...

    Other information:

    Ford Escape 2020-2025 Service Manual: Specifications


      General Specifications Item Specification Plastic front fascia paint maximum thickness 12 mils (300 microns) Plastic rear fascia paint maximum thickness 12 mils (300 microns)   General Specifications Item Specification Plug Weld hole 8 m..

    Ford Escape 2020-2025 Service Manual: Removal and Installation - Rear Side Member


    Special Tool(s) / General Equipment Resistance Spotwelding Equipment 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal   WARNING: Electric vehicles damaged by a crash may have compromised high voltage safety systems and..

    Categories

    Sitting in the Correct Position

    Ford Escape. Sitting in the Correct Position

    When you use them properly, the seat, head restraint, seatbelt and airbags will provide optimum protection in the event of a crash.

    read more

    Copyright © 2025 www.fordescape4.com