Ford Escape: Keys and Remote Controls / Remote Control Limitations
WARNING: Changes or
modifications not expressively approved
by the party responsible for compliance
could void the user's authority to operate
the equipment. The term "IC:" before the
radio certification number only signifies
that Industry Canada technical
specifications were met.
This device complies with Part 15 of the
FCC Rules and with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) This device
must accept any interference received,
including interference that may cause
undesired operation.
Make sure a valid remote control is within
5 ft (1.5 m) from the front door handles
and rear of vehicle.
The system may not function if:
- The remote control remains stationary
for about a minute.
- The vehicle battery has no charge.
- The remote control battery has no
charge.
- There is interference causing issues
with the remote control frequencies.
- The remote control is too close to
metal objects or electronic devices, for
example keys or a cell phone.
Use your remote control to access various
vehicle systems.
Note:The buttons on your remote may vary
depending on the vehicle region or options.
Unlock
Press the button to unlock all
doors...
Other information:
Symptom Chart(s)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Symptom Chart: NVH
Symptom Chart
Condition
Actions
Driveline clunk - loud clunk when shifting from REVERSE to DRIVE
..
Special Tool(s) /
General Equipment
Adhesive Tape
WARNING:
If the clockspring is not correctly centralized, it may fail
prematurely. If in doubt, repeat the centralizing procedure. Failure to
follow these instructions may increase the risk of serious personal
injury or death in a crash.
NOTE:
Typical clockspring shown, others similar.
NOTICE:
Do not over-..