Ford Escape: Engine Ignition - 1.5L EcoBoost (132kW/180PS) – I3 (Y1) / Specifications
Firing order
| Item | Value |
|---|---|
| Firing order | 1 - 2 - 3 |
Spark Plug
| Item | Value |
|---|---|
| Spark plug | 12405 |
| Spark plug gap | 0.8 mm |
Description and Operation - Engine Ignition - Component Location
Item
Description
1
Ignition coil-on-plug(s)
2
Spark plug(s)
..
Other information:
Ford Escape 2020-2026 Service Manual: Removal and Installation - Ignition Switch
Removal Remove the steering column shrouds. Refer to: Steering Column Shrouds (501-05 Interior Trim and Ornamentation, Removal and Installation). Disconnect the electrical connector. Release the tabs and remove the ignition switch. Installation To install, reverse the removal procedure. ..
Ford Escape 2020-2026 Service Manual: Removal and Installation - Rear Halfshaft Seal
Special Tool(s) / General Equipment 205-153 (T80T-4000-W) Handle 205-990Installer, Axle SealTKIT-2012A-FLTKIT-2012A-ROW Flat Headed Screw Driver Removal Remove the rear halfshaft. Refer to: Rear Halfshaft (205-05 Rear Drive Halfshafts, Removal and Installation). Remove and replace the rear halfshaft seal. Use the General Equipment: Flat Heade..
Categories
- Manuals Home
- 4th Generation Ford Escape Owners Manual
- 4th Generation Ford Escape Service Manual
- Adjusting the Headlamps
- Plug-In Hybrid Electric Vehicle Drive Modes
- General Procedures - Brake Service Mode Activation and Deactivation
- New on site
- Most important about car
Sitting in the Correct Position
When you use them properly, the seat, head restraint, seatbelt and airbags will provide optimum protection in the event of a crash.
Copyright © 2026 www.fordescape4.com