Other information:
Check
NOTE:
No factory-equipped vehicle should have more than a 25 mA
(0.025 amp) – 50 mA (0.050) draw depending on the vehicle's accessories.
Check for current drains on the battery in excess of 25 mA (0.025 amp) –
50 mA (0.050) with all the electrical accessories off and the vehicle
at rest for at least 75 minutes (depending on region)...
NOTE:
The compression test requires cranking the engine a minimum of 5
compression strokes with the throttle plate in the wide-open position
for each cylinder. The engine cranking diagnostic mode must be used to
crank the engine and the brake/accelerator pedals must be used to
position the throttle plate during the compression test...