Ford Escape: Body and Paint / Body System - General Information

Body and Paint

..

Specifications

Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Motorcraft® High Performance Engine RTV SiliconeTA-357 WSE-M4G323-A6  Motorcraft® Silicone Spray LubricantXL-6 ESR-M13P4-A  Permatex® Trim and Weatherstrip Adhesive81850 -  ..

Other information:

Ford Escape 2020-2026 Service Manual: Removal and Installation - Cooling Fan Motor and Shroud

Removal NOTE: Removal steps in this procedure may contain installation details. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation). Remove the retainers, release the tabs and remove the air cleaner intake duct pipe. Disconnect the cooling..

Ford Escape 2020-2026 Service Manual: Removal and Installation - Thermostatic Expansion Valve - 1.5L EcoBoost (132kW/180PS) – I3 (Y1)

Removal NOTICE: During the removal of components, cap, tape or otherwise appropriately protect all openings to prevent the ingress of dirt or other contamination. Remove protective materials prior to installation. NOTE: Removal steps in this procedure may contain installation details. Recover the refrigerant. Refer to the appropriate Recovery procedure in Group 412. ..