Ford Escape Manuals

Ford Escape: Driving Hints

Trailer Sway Control

How Does Trailer Sway Control Work The system applies the brakes to the individual wheels and reduces engine torque to aid vehicle stability. If the trailer begins to sway, the stability control lamp flashes and the message Trailer Sway Reduce Speed appears in the information display...

Cold Weather Precautions. Breaking-In. Driving Economically

Cold Weather Precautions The functional operation of some components and systems can be affected at temperatures below approximately -13°F (-25°C)...

Other information:

Ford Escape 2020-2025 Service Manual: Removal and Installation - Transmission


Special Tool(s) / General Equipment 307-805Alignment Pins (2) Ford Diagnostic Equipment Removal NOTE: This step is only necessary when installing a new transmission or ISC (Inverter System Controller). Download the module information to the diagnostic tool using the Programmable Modules Installation routine...

Ford Escape 2020-2025 Service Manual: Removal and Installation - Rear Drive Unit (RDU) Actuator Motor


Removal Remove the rear axle assembly. Refer to: Axle Assembly (205-02A) . NOTICE: The RDU contains axle fluid. To prevent spillage, do not tilt the RDU during actuator motor removal or installation. NOTE: Mark the installation orientation prior to removal with a marker...

Categories

Vehicle Identification

Locating the Vehicle Identification Number

The vehicle identification number is on the left-hand side of the instrument panel.

Ford Escape. Vehicle Identification

read more

Copyright © 2025 www.fordescape4.com