Other information:
Special Tool(s) /
General Equipment
Hose Clamp Remover/Installer
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Drain the cooling system.
Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding (303-03C Engine Cooling, General Procedures)...
Open the liftgate.
Stop the liftgate movement by pressing
the control button on the liftgate when
it reaches the desired height.Note: Once the liftgate stops moving,
you
can manually move it to the desired height.
Press and hold the control button on
the liftgate until a tone sounds,
indicating programming is complete...