Ford Escape: Roof Opening Panel / Removal and Installation - Roof Opening Panel Control Switch
Removal
-
The roof opening panel control switch is replaced as an assembly with the overhead console.
Refer to: Overhead Console (501-12 Instrument Panel and Console, Removal and Installation).
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Pulling downward, remove the cross beam cover.
Refer to: Roof Opening Panel Glass (501-17 Roof Opening Panel, Removal and Installation)...
Removal
Remove the roof opening panel fixed glass.
Refer to: Fixed Glass (501-11 Glass, Frames and Mechanisms, General Procedures).
Installation
To install, reverse the removal procedure...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the headlamp assembly.
Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation).
Remove the screws and position the lower LED control module...
Overview
The RCM continually receives and monitors inputs from the OCSM and various other hard-wired switches and sensors. If the RCM
detects a sudden vehicle deceleration and/or lateral deceleration
based on the information received from the various sensors and
determines that deployment is necessary, it applies voltage and current
to deploy the appropriate SRS components...