Ford Escape 2020-2025 Service Manual / Body and Paint / Body and Paint / Roof Opening Panel / Specifications
Ford Escape: Roof Opening Panel / Specifications
Specifications
| Item | Specification |
|---|---|
| Front sliding glass panel to front trim panel flushness | 0.066 ± 0.106 in (1.7 ± 2.7 mm) |
| Front sliding glass panel to front trim panel distance | 0.26 ± 0.04 in (6.7 ± 2.7 mm) |
| Front sliding glass panel to rear fixed glass panel flushness | 0.059 ± 0.106 in (1.5 ± 2.7mm) |
| Front sliding glass panel to rear fixed glass panel distance | 0.019 ± 0.04 in (4.9 ± 1.1mm) |
| Front sliding glass panel to side trim panel flushness | 0.0 ± 0.106 in (0.0 ± 2.7 mm) |
| Front sliding glass panel to side trim panel distance | 0.024 ± 0.04 in (6.1 ± 1.1mm) |
| Rear fixed glass panel to side trim panel flushness | 0.059 ± 0.106 in (1.5 ± 2.7mm) |
| Rear fixed glass panel to side trim panel distance | 0.018 ± 0.04 in (4.7 ± 1.1mm) |
| Rear fixed glass panel to rear trim panel flushness | 0.0 ± 0.098 in (0.0 ± 2.5mm) |
| Rear fixed glass panel to rear trim panel distance | 0.015 ± 0.04 in (4.0 ± 1.1mm) |
Description and Operation - Roof Opening Panel - Overview
Panoramic Roof Opening Panel
The roof opening panel consists of the following:
Air deflector
Front sliding glass panel (sunroof)
Front sliding glass panel motor (sunroof motor)
Shield (sunshade) assembly
Shield (sunshade) motor
Blinds (concertina blinds)
Roof panel fixed glass (panoramic)
Roof opening panel frame assembly
Roof opening panel control ..
Other information:
Ford Escape 2020-2025 Service Manual: Removal and Installation - Roof Rear Frame
Special Tool(s) / General Equipment 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 5055 - Removal WARNING: Electric vehicles damaged by a crash may have compromised high voltage safety systems an..
Ford Escape 2020-2025 Service Manual: Removal and Installation - High Voltage Battery Coolant Temperature Sensor
Removal NOTE: Removal steps in this procedure may contain installation details. Drain the Electric Powertrain Cooling System. Refer to: Cooling System Filling and Bleeding (303-03D Electric Powertrain Cooling - Hybrid Electric Vehicle (HEV), General Procedures). Remove the retainers and the RH underbody shield. Torque: 22 lb.in (2.5 Nm) Remove th..
Categories
- Manuals Home
- 4th Generation Ford Escape Owners Manual
- 4th Generation Ford Escape Service Manual
- Switching the Lane Keeping System On and Off. Switching the Lane Keeping System Mode. Alert Mode
- Rear View Camera
- Fuel Quality
- New on site
- Most important about car
Under Hood Fuse Box
Locating the Under Hood Fuse Box
Accessing the Under Hood Fuse Box
Copyright © 2025 www.fordescape4.com