Other information:
Removal
Remove the wiper linkage assembly.
Refer to: Wiper Linkage Assembly (501-16 Wipers and Washers, Removal and Installation).
Detach the windshield wiper link from the windshield wiper motor crank and position aside.
NOTE:
Note the position of the component before moving...
Programming
NOTE:
This procedure works only if the spare key programming is enabled.
NOTE:
Two previously programmed keys are required to perform this
procedure. All the steps must be completed within 30 seconds.
NOTE:
Make sure all the doors are closed prior to beginning this
procedure and they remain closed until the procedure is complete...