Ford Escape: Exterior Lighting / Automatic High Beam Control – Troubleshooting
Automatic High Beam Control – Information Messages
How Does Automatic High Beam Control Work
Automatic high beam control turns the
high beams on if it is dark enough and no
other traffic is present. If it detects an
approaching vehicle’s headlamps or tail
lamps, or street lighting ahead, the system
turns the high beams off...
Other information:
Recovery
NOTICE:
Use an A/C refrigerant analyzer before recovering any of the vehicle's
A/C refrigerant. Failure to do so puts the shop's bulk refrigerant at
risk of contamination. If the vehicle's A/C refrigerant is contaminated,
refer the customer to the service facility that carried out the last
A/C service. If the customer wishes to pay the additional cost, use the
A/C recovery equipme..
Special Tool(s) /
General Equipment
Interior Trim Remover
Inspection
NOTE:
Removal steps in this procedure may contain installation details.
Inspect the body-to-liftgate door dimensions.
Open the liftgate.
Position the liftgate opening weather strip aside.
Release the tabs an..