Ford Escape: Body and Paint / Bumpers

Removal and Installation - Roof Opening Panel Trim

Special Tool(s) / General Equipment Knife Materials Name Specification Adhesive WSS-M2G316-B5  Sika® SikaTack® MACH 60 / Sika® SikaTack® MACH 30 / Dow® BETASEAL™ Express -  Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207 -  Removal NOTE: Removal steps in this procedure may contain installation details...

Removal and Installation - Front Bumper

Special Tool(s) / General Equipment Interior Trim Remover Removal NOTE: Removal steps in this procedure may contain installation details...

Other information:

Ford Escape 2020-2026 Owners Manual: First Stage: Reinflating the Tire with sealing compound and air

WARNING: Do not stand directly over the kit while inflating the tire. If you notice any unusual bulges or deformations in the tire's sidewall during inflation, stop and call roadside assistance. WARNING: If the tire does not inflate to the recommended tire pressure within 15 minutes, stop and call roadside assistance...

Ford Escape 2020-2026 Service Manual: General Procedures - Intake Manifold Vacuum Test

Bring the engine to normal operating temperature. Connect the Vacuum/Pressure Tester to the intake manifold. Run the engine at the specified idle speed. The vacuum gauge should read between 51-74 kPa (15-22 in-Hg) depending upon the engine condition and the altitude at which the test is conducted...