Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current SCCM installed. If the
current SCCM does not respond to the diagnostic scan tool, the tool may
prompt for As-Built Data as part of the repair...
Special Tool(s) /
General Equipment
Flat-Bladed Screwdriver
Removal
Non-functional lock cylinder
NOTE:
For non-functional ignition lock cylinders, replace the ignition lock cylinder housing.
Remove the ignition lock cylinder housing...