Ford Escape: Electrical / Lighting

Removal and Installation - Voice Microphone

Removal NOTE: Removal steps in this procedure may contain installation details. Lower the headliner. Refer to: Headliner - Lowering (501-05 Interior Trim and Ornamentation, Removal and Installation)...

Exterior Lighting

..

Other information:

Ford Escape 2020-2026 Service Manual: Removal and Installation - Cabin Heater Coolant Diverter Valve

Special Tool(s) / General Equipment Hose Clamp Remover/Installer Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).   WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with..

Ford Escape 2020-2026 Service Manual: General Procedures - Factory Mode Deactivation

Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center. If the vehicle is in factory mode, the..