Ford Escape: Driveline / Rear Drive Halfshafts

Removal and Installation - Intermediate Shaft

Materials Name Specification Motorcraft® MERCON® ULV Automatic Transmission FluidXT-12-QULV WSS-M2C949-A, MERCON® ULV  Removal Remove the front halfshaft RH ...

Specifications

  LUBRICANT     Material: Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant / XY-80W90-QL (WSP-M2C197-A) ..

Other information:

Ford Escape 2020-2026 Service Manual: General Procedures - High Voltage Battery Charging - Hybrid Electric Vehicle (HEV)

Charging   WARNING: To prevent the risk of high-voltage shock, always follow precisely all warnings and service instructions, including instructions to depower the system. The high-voltage system utilizes approximately 450 volts DC, provided through high-voltage cables to its components and modules. The high-voltage cables and wiring are identified by orange harness tape or orange w..

Ford Escape 2020-2026 Service Manual: Removal and Installation - Cooling Fan Motor and Shroud

Removal NOTE: Removal steps in this procedure may contain installation details. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation). Remove the retainers, release the tabs and remove the air cleaner intake duct pipe. Disconnect the cooling..