Ford Escape: Handles, Locks, Latches and Entry Systems / Removal and Installation - Interior Rear Door Handle Latch Release Cable Clip
Removal
NOTE:
Left hand (LH) shown, right hand (RH) similar.
NOTE:
Typical interior rear door handle latch release cable clip shown, others similar.
-
Remove the rear door trim panel.
Refer to: Rear Door Trim Panel (501-05 Interior Trim and Ornamentation)
.
-
NOTE:
Make sure to note the routing and attachment points
of the cables to ensure correct operation of the interior rear door
handle.
Remove the interior rear door handle latch release cable clip.
-
Disconnect the interior rear door handle lock indicator cable.
-
Disconnect the interior rear door handle cable.
-
Disconnect the interior front door handle cable eyelet.
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
LH (left-hand) side shown, RH (right-hand) side similar.
Remove the rear trim panel.
Refer to: Rear Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation)...
Removal
NOTE:
The keyless entry keypad is serviced as an assembly with the front door upper moulding.
Remove the front door upper moulding...
Other information:
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. SGM
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Module
DTC
Description
Action
APIM
U0293:00
Lost Communication With Hybrid/EV Powertrain Control Module 'A': No Sub Type Information
GO to Pinpo..
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Module
DTC
Description
Action
PCM
P0030:00
HO2S Heater Control Circuit (Bank 1, Sensor 1): No Sub Type Information
GO to Pinpoint Test DW
PCM
P00..