Ford Escape: Speed Sign Recognition / Speed Sign Recognition – Troubleshooting
Speed Sign Recognition – Information Messages

Speed Sign Recognition – Frequently Asked Questions
Why does the speed limit change
without any sign on the road?
The speed limit changes due to the
speed limit data stored in the map
data.
Why does speed sign recognition show
a wrong speed limit?
The system shows a wrong speed limit
due to incorrect and outdated map
data or due to incorrect recognition of
the speed limits by the camera.
Speed Sign Recognition Indicators
When the system detects a speed limit
sign, it appears in the information display.
Setting the Speed Sign Recognition Speed Warning
To set the speed warning, use the
touchscreen...
Other information:
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Module
DTC
Description
Action
BCM
B11D8:01
Restraint Event Notification: General Electrical Failure
GO to Pinpoint Test BO
BECMB
B00A0:11
Occupa..
Garage Door Opener Limitations
Canadian radio-frequency laws require
transmitter signals to time-out (or quit)
after several seconds – which may not be
long enough for HomeLink to pick up the
signal.
U.S. gate operators time-out in the same
manner.
Note: If programming a garage door opener
or gate operator, it is advised to unplug the
device during the “cycling” process to
prevent po..