Ford Escape: Suspension / Wheels and Tires

Removal and Installation - Wheel Studs

Special Tool(s) / General Equipment Hydraulic Press Removal Remove the wheel bearing and wheel hub. Refer to: Wheel Bearing and Wheel Hub - FWD (204-02 Rear Suspension, Removal and Installation)...

Specifications

  General Specifications Item Specification Tire Inflation Tires See Safety Certification Label on driver door jamb Wheel Weights Wheel weight type Use a wheel weight manufacturer's rim gauge to determine the correct wheel weight application   Torque Specifications ..

Other information:

Ford Escape 2020-2026 Owners Manual: Cold Weather Precautions. Breaking-In. Driving Economically

Cold Weather Precautions The functional operation of some components and systems can be affected at temperatures below approximately -13°F (-25°C). Breaking-In You need to break in new tires for approximately 300 mi (480 km). During this time, your vehicle may exhibit some unusual driving characteristics. Driving Economically The following helps to improve fuel consumption: Drive smooth..

Ford Escape 2020-2026 Service Manual: General Procedures - Camshaft Surface Inspection

Inspect the camshaft lobes for pitting or damage in the active area. Minor pitting is acceptable outside the active area. The active area includes the opening ramp and closing ramp. The opening ramp is the point where the lifter just begins to lift until the point it reaches the nose of the lobe. The closing ramp is the point from the nose back down to the lash point. The base circle of t..