Ford Escape: Pre-Collision Assist / Switching Pre-Collision Assist On and Off
You cannot switch the system off.
Adjusting the Pre-Collision Assist Settings
You can adjust the following settings by
using the touchscreen controls in the
pre-collision assist menu:
- Change alert and distance alert
sensitivity to one of three possible
settings.
- Switch distance indication and alert on
or off.
- If required, switch automatic
emergency braking on or off.
- If required, switch evasive steering
assist on or off.
Note: Automatic emergency braking and
evasive steering automatically turns on
every time you switch the ignition on.
Note: If you switch automatic emergency
braking off, evasive steering assist switches
off.
Pre-Collision Assist Precautions
WARNING: You are responsible for
controlling your vehicle at all times. The
system is designed to be an aid and does
not relieve you of your responsibility to
drive with due care and attention...
Camera.
Radar sensor (if equipped).
If a message regarding a blocked sensor
or camera appears in the information
display, something is obstructing the radar
signals or camera images...
Other information:
Special Tool(s) /
General Equipment
Power Caulk Gun
Power Fixed Glass Removal Tool
Vacuum Cleaner
Materials
Name
Specification
Motorcraft® High Performance Engine RTV SiliconeTA-357
WSE-M4G323-A6
Sika® SikaTack® MACH 60 / Sika® SikaTack® MACH 30 / Dow® BETASEAL™ Express
-
Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer..
Removal
WARNING:
Service actions on vehicles equipped with electronic brake
booster and electronic parking brakes may cause unexpected brake
application, which could result in injury to hands or fingers. Put the
brake system into service mode prior to servicing or removing any brake
components. Failure to follow this instruction may result in serious
personal injury.
NOTE:
Re..