Ford Escape: Crash and Breakdown Information / Switching the Hazard Flashers On and Off
The hazard flashers operate when the
ignition is in any position, or if the key is not
in the ignition. The battery loses charge
and may have insufficient power to restart
your vehicle if your vehicle is in use or if the
key is not in the ignition.

The flasher control is on the instrument
panel. Use your hazard flashers when your
vehicle is creating a safety hazard for other
road users.
Switch the hazard flashers on and all front
and rear direction indicators flash.
Press the button again to switch them off.
In the event of damage or fire involving an
electric vehicle or hybrid-electric vehicle:
Assume the high-voltage battery and
associated components are energized
and fully charged...
Jump Starting Precautions
WARNING: Batteries normally
produce explosive gases which can
cause personal injury. Therefore, do not
allow flames, sparks or lighted
substances to come near the battery...
Other information:
DISASSEMBLY
Remove the rear bumper cover.
Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation).
Disconnect the hands-free liftgate module electrical connector.
Disconnect the rear park aid sensor electrical connectors...
Overview
The rear suspension consists of the following components:
Coil springs
lower arms
Shock absorber
Stabilizer bar and links
Toe links
Upper arms
Wheel bearing and wheel hub assemblies
Wheel knuckles
Wheel studs
The
rear suspension uses 2 parallel arms (1 upper and 1 lower)...