Other information:
Removal
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI (programmable module installation) process
must begin with the current DSM (driver front seat module) installed. If
the current DSM (driver front seat module) does not respond to the
diagnostic scan tool, the tool may prompt for As-Built Data as part of
the repair.
Using a diagnostic scan ..
Switching Keyless Entry On and Off
Switch the ignition on using an original
key that has not been created as a
MyKey.
Press Settings on the touchscreen.
Press Vehicle Settings.
Press Locks.
Reprogramming the Unlocking Function
You can enable two-stage unlocking
function allowing you to unlock only the
driver door when you touch the unlock
sensor.
Press and hold both the lock and unloc..