Ford Escape: Service Information / Identification Codes

General Procedures - Wire Terminal Inspection and Removal

Disconnect   WARNING: Before beginning any service procedure in this section, refer to Health and Safety Precautions in section 100-00 General Information...

Description and Operation - Identification Codes

VIN VIN Locator The VIN is a 17-digit combination of letters and numbers. The VIN is stamped on a metal tab riveted to the instrument panel, top upper left of the dash...

Other information:

Ford Escape 2020-2025 Service Manual: General Procedures - Valve Clearance Adjustment

Special Tool(s) / General Equipment Feeler Gauge Check Refer to: Valve Cover (303-01C Engine, Removal and Installation). NOTE: Turn the engine clockwise only, and only use the crankshaft bolt. NOTE: Before removing the camshafts, measure the clearance of each valve at base circle, with the lobe pointed away from the tappet...

Ford Escape 2020-2025 Service Manual: Removal and Installation - C-Pillar Side Impact Sensor

Removal   WARNING: The following procedure prescribes critical repair steps required for correct restraint system operation during a crash. Follow all notes and steps carefully. Failure to follow step instructions may result in incorrect operation of the restraint system and increases the risk of serious personal injury or death in a crash...