Ford Escape: General Information
Workshop service manual for fourth generation Ford Escape a compact crossover vehicle sold by Ford, model years 2020-2022. New powertrains and transmission systems, a reduction in weight, improved aerodynamics and updated suspension system all contribute to one undeniable fact: this is the best-performing, most fun-to-drive Escape ever...
Other information:
Special Tool(s) /
General Equipment
Ford Diagnostic Equipment
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Vehicle equipped with halogen headlamps shown, light emitting diode (LED) headlamps similar.
Remove the front bumper cover.
Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
Remove..
Removal
Refer to: Accessory Drive Belt - Vehicles Built Up To: 1-October-2020
(303-05A Accessory Drive - 1.5L EcoBoost (132kW/180PS) – I3 (Y1),
Removal and Installation).
Loosen the bolt and remove the accessory drive belt idler pulley.
Torque:
18 lb.ft (25 Nm)
Installation
To install, reverse the removal procedure.
..
Categories
What Is the Master Access Code
The master access code is a factory-set
five-digit entry code. You can operate the
keypad with the master access code at
any time. The master access code is on the
owner’s wallet card in the glove box and
is available from an authorized dealer.
Displaying the Master Access Code
To display the factory-set code in the
information display:

Remove the rubber mat.
Insert the first programmed key in the
backup slot.
Press the push button ignition switch
once and wait a few seconds.
Press the push button ignition switch
again and remove the key.
Within 10 seconds, place a second
programmed intelligent access key in
the backup slot and press the push
button ignition switch.
read more