Ford Escape: Climate Control System - General Information / Description and Operation - Climate Control System - Vehicles With: Electronic Automatic Temperature Control (EATC) - Overview
Overview
The EATC system maintains the selected vehicle interior temperature
by heating and/or cooling the air depending on the HVAC control panel
selection.
-
The temperature control setting is the desired cabin air temperature.
-
The blower motor control override buttons vary the blower motor speed.
-
The driver may override the automatic mode of operation.
-
During A/C operation, the system reduces the relative humidity of the air inside the vehicle.
-
Vehicles equipped with Auto Start-Stop have a cabin heater coolant pump to help coolant flow to the heater core.
Overview
The DATC system maintains the selected vehicle interior temperature
by heating and/or cooling the air depending on the HVAC control panel
selection...
Overview
The EMTC system heats or cools the vehicle interior depending on the HVAC control panel selection.
The control panel selection determines heating or cooling, air distribution and enables blower motor operation...
Other information:
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Open the rear tail gate.
Release the clips and remove the upper liftgate trim panel...
Check
NOTE:
Perform the following pre-checks to make sure module programming completes without errors.
Start the programming session in Key OFF, Engine OFF and prior to initiating programming, turn to KOEO .
Make sure the vehicle battery is fully charged or is
connected to a battery charger...