The DATC system maintains the selected vehicle interior temperature
by heating and/or cooling the air depending on the HVAC control panel
selection.
Other information:
Overview
Multiplexing
is a method of sending 2 or more signals simultaneously over a single
circuit. Multiplexing allows 2 or more electronic modules (nodes) to
communicate over a twisted wire pair [data (+) and data (-)] network.
The information or messages that can be communicated on these wires
consists of commands, status or data...
Removal
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02)
.
Drill the rivets, release the tabs and remove the lower rear bumper cover valence
Disconnect the hands-free liftgate actuation upper sensor electrical connector...