Ford Escape: Voltage Converter/Inverter / Description and Operation - Direct Current/Alternating Current (DC/AC) Inverter - Overview
Overview
The DC - AC inverter converts 12 volts DC to 110 volts AC to power a
device that uses AC with a power requirement of less than 150 watts.
System Diagram
System Operation
Network Message Chart
Broadcast Message
Originating Module
Message Purpose
Power pack torque status
Secondary On-Board Diagnostic Control Module C (SOBDMC)
Used to determine if the vehicle is started or if torque is available...
Other information:
Adjusting the Steering Wheel
WARNING: Do not adjust the
steering wheel when your vehicle is
moving.
Note: Make sure that you are sitting in the
correct position.
Unlock the steering column.
Adjust the steering wheel to the desired
position.
Lock the steering column...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Open the glove compartment and remove the check strap.
Fully lower the glove compartment.
Lift glove compartment off the hinge piviot...