Ford Escape: Battery and Charging System / Generator and Regulator

Removal and Installation - Low Voltage High Current Fuse - 2.5L Duratec – Hybrid (121kW/164PS) (BG)

Removal De-energize the High Voltage battery. Refer to: High Voltage System De-energizing (414-03A High Voltage Battery, Mounting and Cables, General Procedures)...

Specifications

  General Specifications Item Specification 1.5L EcoBoost Vehicles Rating 180 amps Generator amps at 80...

Other information:

Ford Escape 2020-2026 Service Manual: Removal and Installation - Axle Assembly

Special Tool(s) / General Equipment Transmission Jack Wooden Block Removal NOTE: Removal steps in this procedure may contain installation instructions. Remove the rear halfshafts. Refer to: Rear Halfshaft (205-05 Rear Drive Halfshafts, Removal and Installation)...

Ford Escape 2020-2026 Service Manual: General Procedures - Refrigerant System Tests - 1.5L EcoBoost (132kW/180PS) – I3 (Y1)

Inspection NOTE: Procedure 1 — Ambient Temperature below 21 °C (70 °F). NOTE: Proper A/C system diagnosis on a vehicle’s compressor is dependent on correct refrigerant system charge and tested in ambient temperatures above 21°C (70°F)...