Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the brake master cylinder.
Refer to: Brake Master Cylinder - Vehicles With: Vacuum Brake Booster
(206-06 Hydraulic Brake Actuation, Removal and Installation).
Remove the brake fluid reservoir cap and syphon the brake fluid..
Remove the pin and the bra..
Removal
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI (programmable module installation) process
must begin with the current DSM (driver front seat module) installed. If
the current DSM (driver front seat module) does not respond to the
diagnostic scan tool, the tool may prompt for As-Built Data as part of
the repair.
Using a diagnostic scan ..