Ford Escape: Service Information / Noise, Vibration and Harshness

Description and Operation - Jacking and Lifting - Overview

Jacking and Lifting Points PHEV Only the specified jacking points may be used for jacking and supporting the vehicle. NOTICE: Make sure that no load is placed on the SOBDM ...

Description and Operation - Noise, Vibration and Harshness (NVH)

Acceptable Noise, Vibration and Harshness (NVH) Noise is any undesirable sound, usually unpleasant in nature. Vibration is any motion, shaking or trembling, that can be felt or seen when an object moves back and forth or up and down...

Other information:

Ford Escape 2020-2025 Service Manual: General Procedures - Engine Cooling System Draining, Vacuum Filling and Bleeding

Special Tool(s) / General Equipment ROB75240Coolant/Battery Refractometer (Fahrenheit) Fluid Container Cooling System Vacuum Tester and Refiller Draining NOTICE: The coolant must be recovered in a suitable, clean container for reuse...

Ford Escape 2020-2025 Service Manual: General Procedures - Cylinder Block Distortion

Special Tool(s) / General Equipment Feeler Gauge Check NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Use a Straightedge that is calibrated by the manufacturer to be flat within 0.005 mm (0.0002 in) per running foot of length, such as Snap-On® GA438A or equivalent...