Ford Escape: Exhaust System / Exhaust System

Exhaust System

..

Description and Operation - Exhaust System - Component Location

Item Description 1 Catalytic converter heat shield 2 Exhaust manifold 3 Exhaust manifold gasket 4 Universal heated exhaust gas oxygen (U-HEGO) sensor 5 Heated exhaust gas oxygen (HEGO) sensor 6 Catalyst assembly 7 Exhaust flexible pipe 8 Converter sub-assembly 9 Passive valve (if equipped) ..

Other information:

Ford Escape 2020-2025 Service Manual: General Procedures - Compression and Cylinder Leakage Test - 2.5L Duratec – Hybrid (121kW/164PS) (BG)

NOTE: The compression test requires cranking the engine a minimum of 5 compression strokes with the throttle plate in the wide-open position for each cylinder. The engine cranking diagnostic mode must be used to crank the engine and the brake/accelerator pedals must be used to position the throttle plate during the compression test. The engine cranking diagnostic mode is a PCM strategy whi..

Ford Escape 2020-2025 Service Manual: Description and Operation - Fuel Tank and Lines - System Operation and Component Description

System Operation Fuel Systems The fuel system supplies the fuel injectors with clean fuel at a controlled pressure. The PCM controls the fuel pump and monitors the fuel pump circuit. The PCM controls the fuel injector ON/OFF cycle duration and determines the correct timing and amount of fuel delivered. When a new fuel injector is installed it is necessary to reset the learned values conta..