Other information:
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
SYNC module [APIM] to universal serial bus (USB) hub cable (instrument panel side)
Remove the APIM .
Refer to: SYNC Module [APIM] (415-00 Information and Entertainment System - General Information, Removal and Installation).
Disconnect the in-line USB cable connector.
..
Inspection
NOTE:
Procedure 1 — Ambient Temperature below 21 °C (70 °F).
NOTE:
Proper A/C system diagnosis on a vehicle’s
compressor is dependent on correct refrigerant system charge and tested
in ambient temperatures above 21°C (70°F). Perform the following steps
to achieve normal operating pressures.
Drive the vehicle or run the engine until it reaches normal operati..