Ford Escape: Climate Control System - General Information / Removal and Installation - Condenser - 1.5L EcoBoost (132kW/180PS) – I3 (Y1)
Removal
NOTICE:
During the removal of components, cap, tape or otherwise
appropriately protect all openings to prevent the ingress of dirt or
other contamination. Remove protective materials prior to installation.
NOTE:
Removal steps in this procedure may contain installation details.
-
It is not necessary to remove the transmission oil cooler and CAC from the radiator.
Remove the radiator.
Refer to: Radiator (303-03A Engine Cooling - 1.5L EcoBoost (132kW/180PS) – I3 (Y1), Removal and Installation).
Installation
-
To install, reverse the removal procedure.
-
NOTICE:
Only use the specified material to lubricate the seals.
Install and lubricate new O-ring seals.
Refer to: Specifications (412-00 Climate Control System - General Information, Specifications).
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
Refer to: Refrigerant Oil Adding - Vehicles With: R1234YF Refrigerant (412-00)
.
Refer to: Refrigerant Oil Adding - Vehicles With: R134A Refrigerant (412-00)
.
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the instrument panel.
Refer to: Instrument Panel (501-12 Instrument Panel and Console, Removal and Installation)...
Removal
NOTICE:
During the removal of components, cap, tape or otherwise
appropriately protect all openings to prevent the ingress of dirt or
other contamination...
Other information:
Before starting the engine, check the
following:
Make sure the headlamps and
electrical accessories are off.
Make sure the parking brake is on.
Make sure the transmission is in park
(P).
Fully press the brake pedal.Note: Do not touch the accelerator
pedal...
Partial Replacement
Item
Description
1
Sectioning area
2
Manufacture weld joint
Decision Criteria
The following points a crucial to the decision of complete or partial replacement of the part(s)...