Ford Escape: Tire Sealant and Inflator Kit

Inspecting the Wheel Valve Stems. Tire Rotation

Inspecting the Wheel Valve Stems Check the valve stems for holes, cracks, or cuts that could permit air leakage. Tire Rotation WARNING: If the tire label shows different tire pressures for the front and rear tires and the vehicle has a tire pressure monitoring system, then you need to update the settings for the system sensors...

What Is the Tire Sealant and Inflator Kit. Tire Sealant and Inflator Kit Precautions. Locating the Tire Sealant and Inflator Kit

What Is the Tire Sealant and Inflator Kit The kit consists of an air compressor to re-inflate the tire and a canister of sealing compound that will effectively seal most punctures...

Other information:

Ford Escape 2020-2025 Service Manual: Description and Operation - Evaporative Emissions - Overview

Overview The EVAP system prevents hydrocarbon emissions from entering the atmosphere by storing fuel vapors and routing the vapors to the engine to be consumed during normal engine operation. The EVAP system consists of: EVAP canister EVAP canister purge valve Fuel Tank Pressure (FTP) sensor and tube Easy Fuel™ (capless) fuel tank filler pipe Fuel vapor vent val..

Ford Escape 2020-2025 Service Manual: General Procedures - Driveshaft Angle Measurement

Check NOTE: Prior to checking driveline angularity, inspect the U-joints for correct operation. NOTE: An incorrect driveline angle can cause a vibration or shudder. NOTE: Driveline angularity is the angular relationship between the engine crankshaft, the driveshaft and the rear axle pinion. Factors determining driveline angularity include ride height, rear spring and engine mounts...