Ford Escape: Body and Paint / Front End Sheet Metal Repairs

General Procedures - Body Panel Sectioning

S..

Removal and Installation - Dash Panel

Special Tool(s) / General Equipment 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal NOTICE: Battery electric vehicle (BEV), hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle (PHEV) contain a high-voltage battery..

Other information:

Ford Escape 2020-2026 Service Manual: General Procedures - Factory Mode Deactivation

Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center. If the vehicle is in factory mode, the..

Ford Escape 2020-2026 Service Manual: Description and Operation - Impact of Insufficient Repair Quality

Body repairs usually require a significant level of intervention in the existing body shell structure. The corrosion protection, seals and NVH components are destroyed and must be replaced. To prevent the vehicle quality from being compromised due to a poor quality repair, all repairs must be inspected during and after the accident repair. NOTE: Logs of the acceptance of individual oper..