Ford Escape: Fuel System - General Information / Fuel Tank and Lines

General Procedures - Quick Release Coupling

Disconnect NOTICE: When reusing liquid or vapor tube connections, make sure to use compressed air to remove any foreign material from the connector retaining clip area before separating from the tube or damage to the tube or connector retaining clip may occur...

Description and Operation - Fuel Tank and Lines - System Operation and Component Description

System Operation Fuel Systems The fuel system supplies the fuel injectors with clean fuel at a controlled pressure. The PCM controls the fuel pump and monitors the fuel pump circuit...

Other information:

Ford Escape 2020-2025 Service Manual: Removal and Installation - Valve Cover

Special Tool(s) / General Equipment 205-153 (T80T-4000-W) Handle 303-1247VCT Spark Plug Tube Seal Remover and InstallerTKIT-2006UF-FLMTKIT-2006UF-ROW Materials Name Specification Motorcraft® High Performance Engine RTV SiliconeTA-357 WSE-M4G323-A6  Motorcraft® Metal Surface Prep WipesZC-31-B -  Removal NOTE: During engine repair proced..

Ford Escape 2020-2025 Service Manual: General Procedures - Starter Motor Drive Gear and Flywheel Ring Gear Inspection

Activation Refer to: Starter Motor (303-06C) . Check the wear patterns on the starter drive gear and the flywheel or flexplate ring gear. If the wear pattern is normal, install the starter motor. Refer to: Starter Motor (303-06C) . If the starter drive gear and the flywheel or flexplate ring gear are not fully meshing and the gears are score..