Ford Escape: Instrumentation and Warning Systems / Parking Aid - Vehicles With: Rear Parking Aid

Removal and Installation - Horn

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation)...

Specifications

  General Specifications - Rear Parking Aid Item Specification Test object position 1 (P1) and position 5 (P5), distance from rear bumper 30 cm (12 in) Test object position 2 (P2) and position 4 (P4), distance from rear bumper 91 cm (36 in) Test object position 3 (P3), distance from rear bumper 152 cm (60 in) ..

Other information:

Ford Escape 2020-2026 Service Manual: Removal and Installation - Battery Energy Control Module (BECM) - Hybrid Electric Vehicle (HEV)

Removal   WARNING: To prevent the risk of high-voltage shock, always follow precisely all warnings and service instructions, including instructions to depower the system. The high-voltage system utilizes approximately 450 volts DC, provided through high-voltage cables to its components and modules. The high-voltage cables and wiring are identified by orange harness tape or orange wi..

Ford Escape 2020-2026 Service Manual: Removal and Installation - Driver Door Window Control Switch

Special Tool(s) / General Equipment Interior Trim Remover Removal Remove the driver door window control switch and bezel as an assembly. Starting from the front, release the locking tabs from the driver door window control switch bezel assembly. Use the General Equipment: Interior Trim Remover Disconnect the electrical connector and remove the driver doo..