Ford Escape: Suspension / Rear Suspension

Disassembly and Assembly - Front Strut and Spring Assembly

Special Tool(s) / General Equipment Spring Compressor Vise DISASSEMBLY NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems...

Description and Operation - Rear Suspension - Overview

Overview The rear suspension consists of the following components: Coil springs lower arms Shock absorber Stabilizer bar and links Toe links Upper arms Wheel bearing and wheel hub assemblies Wheel knuckles Wheel studs The rear suspension uses 2 parallel arms (1 upper and 1 lower)...

Other information:

Ford Escape 2020-2025 Service Manual: Removal and Installation - Rear Door Moulding

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: LH side door shown, RH side door similar. NOTE: Do not use excessive force when removing retainers, to avoid damage to moulding. Using a non-marring trim tool, disengage the moulding retainers attaching the moulding to the door...

Ford Escape 2020-2025 Service Manual: General Procedures - Intake Manifold Vacuum Test

Bring the engine to normal operating temperature. Connect the Vacuum/Pressure Tester to the intake manifold. Run the engine at the specified idle speed. The vacuum gauge should read between 51-74 kPa (15-22 in-Hg) depending upon the engine condition and the altitude at which the test is conducted...