Ford Escape: Body and Paint / Body Closures

Removal and Installation - Hood

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the retainers and the hood insulation. Detach the windshield washer hose coupling...

Description and Operation - Body Closures - Component Location

Item Description 1 Power liftgate motor 2 RGTM 3 Power liftgate latch 4 Hands-free liftgate actuation upper sensor (if equipped) 5 Hands-free liftgate actuation lower sensor (if equipped) 6 Hands-free liftgate actuation module (if equipped) 7 Liftgate anti-pinch switches ..

Other information:

Ford Escape 2020-2026 Service Manual: Removal and Installation - Side Obstacle Detection Control Module (SODCM)

Removal Side obstacle detection control module NOTE: This step is only necessary if the SODL or SODR is being replaced. NOTE: This procedure can be used for all locations of the component. Using a diagnostic scan tool, begin the PMI process for the SODL or SODR following the on-screen instructions. Remove the rear bumper cover. Refer to: Rear Bumper Cover (501-19..

Ford Escape 2020-2026 Service Manual: Description and Operation - Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC)/Electronic Automatic Temperature Control (EATC) - Component Location

Item Description 1 Driver side register 2 In-vehicle temperature & humidity sensor 3 Driver side register air discharge temperature sensor 4 Sunload sensor 5 Passenger side register air discharge temperature sensor 6 Passenger side register 7 Passenger side footwell air discharge temperature sensor 8 Center registers 9 ..